SMF1262RS Budget Rubber Sealed Stainless Steel Flanged Deep Groove Ball Bearing 6x12x4mm

Stainless Steel Rubber Sealed Flanged Deep Groove Ball Bearings: Manufactured in stainless steel to the same principal sizes as standard chrome steel bearings with rubber seals. These bearings have an additional flange to allow fitting into a housings flush against the shoulder of the flange. They are often used on steel tracks as guides and supports. The seals serve to offer protection to prevent ingress of debris, moisture and dust whilst retaining the grease within the bearing
Benefits: Cost effective replacement bearing, Flanged design, Higher corrosion resistance
Note: These bearings will eventually corrode in a marine environment and it is recommended to completely cover with grease or similar protection where practical. Due to the material requirements of these bearings to have a hard-wearing construction, they will be made of a harder form of Stainless Steel, such as 440 or similar, which will be attracted by magnets.

Brand / Quality:

EU Budget - Economy Quality

Inside Diameter:

6mm

Outside Diameter:

12mm

Width:

4mm

Seals / Shields:

Rubber Sealed

Clearance:

* Standard